- Details
- Written by: IT Pro
- Category: How to Articles
- Hits: 6942
2. In the Settings window, go to System (Top left part of the window).
3. In System, look for the About option on the left pane part of the window. It should be the bottom option.
4. In the About window, you can already see information about your computer such as the RAM size, CPU type etc. if you wish to get even more information, scroll down the window till you see the entirety of the Device Information sub-window.
- Details
- Written by: IT Pro
- Category: How to Articles
- Hits: 6968
Introduction:
In this article we will demonstrate how to get to the Startup settings. These settings used to be reachable by pressing the F8 key till Windows 8 came along. These settings are somewhat useful when trying to solve startup issues in Windows.
- Make sure you are in recovery mode. If not, use this article to get there:
- Click on Troubleshoot and wait for the Troubleshoot window to load
3. In Troubleshoot, click on Advanced options. Wait for the Advanced options window to load
- In Advanced options, click on Startup Settings. Wait for the Startup Settings window to load
5. In Startup Settings you will be informed that after restarting the computer you will be booted into the following startup settings:
a. Enable low-resolution video mode
b. Enable debugging mode
c. Enable boot logging
d. Enable Safe Mode
e. Disable driver signature enforcement
f. Disable early-launch anti-malware protection
g. Disable automatic restart on system failure
7. Once booted, Windows will present to you the latter mentioned options.
8. Pick one of these options as you see fit by pressing the number keys on the keyboard. For example, 1 is for Enable debugging, 2 is for Enable boot logging etc.
9. Once pressed, Windows will start with the chosen setting.
- Details
- Written by: IT Pro
- Category: How to Articles
- Hits: 6660
2. In the secondary Start menu, look for the Shut down or sign out option. It should be next to the last option. Hover your mouse cursor over it until the menu extends to another sub-menu. If it does not happen – click on it once.
4. Wait for Windows to restart itself.
5. Windows should now boot into Recovery mode
- Details
- Written by: IT Pro
- Category: How to Articles
- Hits: 7140
Introduction:
In this article we will demonstrate how to reset a Windows 11 installation (PC) from within Windows itself.
1. We will start by going to Start and then Settings.
2. In Settings, we will go to System on the left pane.
3. Once the system options are loaded, we will look for the Recovery option in the right pane. It should be close to the bottom part of the window.
- In Recovery there is a section called Recovery options. Under it there is a rubrical called Reset this PC. On the same line as this sentence, there is a button called Reset PC, click on it once and wait for the Reset this PC window to load.
5. In the Reset this PC window you’ll see 2 options:
a. Keep my files
b. Remove everything
6. In this article we will choose the latter option which is “Remove everything”
7. Once chosen, a Getting things ready sentence will appear. Wait patiently till the next stage comes.
8. Additional settings – here you can choose to clean the drive or not. Cleaning the drive means not just deleting the files on it but also wiping them entirely leaving no room for files restoration later on.
10. Wait patiently for the next stage to appear.
11. Here, Windows sums up the actions we have chosen to perform before performing them. Go over the actions. In this case Windows will:
a. Remove all the personal files and user accounts on this PC
b. Remove any changes made to settings
c. Remove all apps and programs
d. Reinstall Windows from this device
12. Windows is also kind enough to remind us that This will take a while and you PC will restart.
14. Here Windows is preparing to reset the PC. Once done, it will restart the PC and start the reset process.
15. After finishing resetting Windows will start reinstalling itself. As noted below, keep your computer on (not turned off) and plugged into a power source or a charger if it’s a laptop.
16. After resetting the PC and installing Windows it’s time for the initial configuration stage which is the final stage of the resetting process.
17. Choose a country or a region, click YES afterwards.
18. Choose a keyboard layout, click YES afterwards.
20. Network connection stage:
a. In this stage we will bypass Windows insistence of connecting to the internet in order to install itself.
b. Click I don’t have internet
- Click and hold the CTRL key and click the F10 key momentarily. A CMD window will appear
In the CMD window, type the following:
Oobe\bypassnro
Hit the ENTER key
For a very brief moment you will see an output in the CMD window saying “The operation completed successfully” before the installation process restarts the computer
Go through all of the following stages (again):
Is this the right country or region? >> Is this the right keyboard layout or input method ? >> Second keyboard layout
You will be presented with the same “Let’s connect you to a network” stage again
Click on “I don’t have internet”
23. Password is optional, in this article’s case we will leave it blank (no password).
25. Windows will now finalize its installation process and start.
26. The Resetting process is done.
- Details
- Written by: IT Pro
- Category: How to Articles
- Hits: 6491
Introduction:
In this article we will demonstrate how to configure Windows 11 to be able to show hidden files and folders that are otherwise are like that out of the box.
1. Let’s go to where Windows is currently installed, in this case it’s the C: drive.
4. Once inside Folder Options, go to the VIEW tab on the top part of the window. Click on it. Wait for the View tab to load.
7. Let’s go back to C: drive. Now we can see many more folders, and we can see some files as well.
